I heard put it in the sunlight, then brush off. I have also used a sand blaster with glass beads, and a lower pressure. Make sure you remove the cause of the mould, otherwise it will come back. John Ross Windsor, Nova Scotia ----- Original Message ----- From: Ruth Van Dine To: caut at ptg.org Sent: Saturday, August 29, 2009 6:18 PM Subject: [CAUT] Cleaning old mold Hi, I need to clean old mold out of a 1940 ebony Steinway. I've heard to just vacuum off the old mold, clean it with a mild detergent solution, rinse & dry. Also noted that bleach is not the solution to use. Is this about right?? Ruth Ruth Van Dine, RPT 62 Stokes St, Warwick RI 02889 401-921-2456 www.RuthsPiano.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090829/857aedcb/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC