Pianotek has it and it is exactly what it sounds like...a taut line to duplicate the string height section by section for blow, let-off, drop etc. David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: johnparham at piano88.com To: caut at ptg.org Received: 8/26/2009 8:15:45 PM Subject: Re: [CAUT] Damper wire alignment (was:Underlever Felt) >Susan, >I am new to this list. >If you don't mind, what is the Taut Line regulation gauge? I tend to >listen to good advise and try to make whatever kind of tools/jigs I can >as a way to learn at the same time. >If it's appropriate to contact me directly so as to not waste time here, >that's fine with me. >Thanks for any new ideas, >John Parham >Hickory, NC >> -------- Original Message -------- >> Subject: Re: [CAUT] Damper wire alignment (was:Underlever Felt) >> From: Susan Kline <skline at peak.org> >> Date: Tue, August 25, 2009 2:39 am >> To: caut at ptg.org >> At 07:22 PM 8/24/2009, you wrote: >> >Well, that is a pretty cool idea. I will give it a try... >> Jon is really good at this kind of stuff. >> Remember the Taut Line regulation gauge? >> Fantastic .... it is always in my kit, taking up so little >> room and so light weight that I forget it's there till I >> need it. >> Susan Kline
This PTG archive page provided courtesy of Moy Piano Service, LLC