Alan, What kind of piano is it? Schimmel had problems with some laminated keys a few years back. They will replace them. Jim -----Original Message----- From: reggaepass at aol.com To: caut at ptg.org Sent: Thu, Aug 20, 2009 5:27 am Subject: [CAUT] Key Spacing: The Distal End When spacing (i. e., bending) the portion of the key between the balance pin and the distal end (where the lifter felt is) is indicated, does anyone have a technique that works particularly well for them? We are experimenting with heat alone (which we have found to be extremely slow-going, so far) and with steam (more rapid results, but harder to contain than heat without all that moisture in it). Thoughts? Alan Eder -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090820/3fc05593/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC