Hi Ric, You tried adding mass to the bridge, via vise grips to rear bridge pins, to see if the tone improves? Alan -- Alan McCoy, RPT Eastern Washington University amccoy at ewu.edu 509-359-4627 (message Pacific time) 509-999-9512 (cell Pacific time) ________________________________ From: <ricb at pianostemmer.no> Reply-To: CAUTlist <caut at ptg.org> Date: Wed, 12 Aug 2009 12:24:56 -0700 To: CAUTlist <caut at ptg.org> Subject: [CAUT] Steinway Bell Hi folks... all had a nice summer have we ?? :) Got a question about the Steinway Bell thingy... Subject is a Hamburg D, the bolt has been tightened at some point to get rid of a buzz that ended up being related to the screw down cross strut. Buzz fixed but this instrument has a rather thin sound.... and has for most of its 8 year life. I'm wondering if over tightening of the bell can cause any such tonal detriment ? It seems to just lack that fullness of sound and the problem is most noticeble in the C4 to F6 area.... any thoughts ? Cheers RicB -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090812/4561cfda/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC