I think it is indeed the screw holes in the rail. For fun, I just screwed in the screws with no wippen on these 3 samples I took off. Well, what do you know...the screws are at different heights! Is there a way to remedy this, or am I stuck. Is this a replaceable part? Paul From: Paul T Williams <pwilliams4 at unlnotes.unl.edu> To: CAUTlist <caut at ptg.org> Date: 07/31/2009 12:25 PM Subject: [CAUT] Friday Puzzler Hi gang! I'm puzzled! I'm now working on a 1966 Steinway M with a strange thing going on. I looked and the wippens and they're all askew and not in any kind of even line on the brass rail. Some places, they're nearly 2mm off. I tried to attach a picture, but it was too big. I'm still getting used to my new camera and iMac (having been a life-time PC guy). I checked the wips themselves, and they're all good. I can't "see" anything off on the brass rail, but only took off 3 wips in a row to check the rail out. Have any of you ever come across this? I've got a message out to our tech support guy about the picture, but perhaps you know what I'm describing. Thanks for any help. Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090801/f7251b75/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC