[CAUT] Soundboard weighting

[Delwin D Fandrich]

Yes, this does work. Better, I think, than hanging the load down below the
board. And it doesn't seem to matter if you drill into one of the leads
occasionally.
 
ddf
 
 


  _____  

From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of David Love
Sent: April 28, 2009 7:29 AM
To: caut at ptg.org
Subject: Re: [CAUT] Soundboard weighting



One other note, if you are able to know about how much mass loading in advance
you can also bury some lead in the bridge body before you recap it. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090428/8eb73872/attachment.html>