Hi All. In regulating this Baldwin R I've been talking about. I'm narrowing in (I hope) on a couple of issues hindering the regulation. I think the backchecks are too high. Does anyone have the specs on how high up from the back of the key the backchecks should be? 1966 Baldwin R. The angle is also wrong, but I have that information, but I think, since these are not original, they were not installed deep enough into the key, or the wires from whatever supply house were too long. Any hints? Thanks people! Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090414/644b6c32/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC