Ron, Bingo. I think you may be on to something because when I oversaturated the bushings and tried to insert sizing cauls 3 literally fell out. I'm going to experiment. My concern would also be how it affects future adhering. Jim -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Ron Nossaman Sent: Friday, November 07, 2008 9:03 AM To: caut at ptg.org Subject: Re: [CAUT] profelt > An anecdote from earlier this week. I used the Profelt on the key > bushings of a practice room M. I used more than a couple of drops but > far from soaking. I inserted cauls and let them set overnight. In the > morning I noticed that I had missed inserting the caul on one front > bushing. While all the other bushings were solid and improved, the key > without the caul had the bushings totally unglued. > > dp We might be missing the obvious here. This may prove to be the magic stuff to strip out those mutant bushings that aren't soakable, steamable, or otherwise removable by any reasonable method. Seems worth a try. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC