One solution I came up with in one situation like this was mount a small receptical inside the rim under the piano. I shortened the cord and put a plug on it and plugged it into the receptical. I ran a heavier cord from the receptical to the outlet. This cord could be replaced any time the cord gets damaged and I haven't heard that the fire marshall didn't like it. About the rivits, a couple of thoughts. One, if your wife does any sewing she may have a rivit tool she uses for certain applications in sewing. Drill out the old rivit and put a new one in. Another thought is how old is the unit. I think Dampp Chaser has a 5 year warrantee and it it is less than 5 years old they may replace it. If it is less than 5 years old and this is happening you must have a lot of iron in your water. Clarence Zeches ----- Original Message ----- From: reggaepass at aol.com To: caut at ptg.org Sent: Wednesday, November 05, 2008 4:09 PM Subject: [CAUT] Dampp-Chaser component issues We have come up against two problems with the components of our Dampp-Chaser systems. One is damage to the power cords by stage dollies when the piano is mounted on one and gets moved around at all. The problem is that the ac power cords get run over by the dollies. Over time, the insulation of the cords become worn enough that the copper wire itself becomes exposed or, worse yet, the cords become severed. Our school’s safety policy prohibits taping of exposed wire or splicing and taping a severed cord, and it doesn’t look like there is a consumer-feasible way to replace the cord, requiring replacement of the humidistat (which is lots of $$$, considering it is really a cord-related problem). Does anyone know of something in which the power cords can be encased, so as to leave them flexible, yet make them more impervious to the effects of being run over by the wheels of the stage dollies? Or is there a way to replace the power cord without “compromising” the housing of the humidistat? The other problem is what to do when the rivet that holds the low-water warning light probe in place gives up the ghost and no longer does it's job. Has anyone else out there run into this and developed a reliable fix? Thanks, Alan Eder ------------------------------------------------------------------------------ Instant access to the latest & most popular FREE games while you browse with the Games Toolbar - Download Now! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ptg.org/pipermail/caut_ptg.org/attachments/20081105/90b06934/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC