Who developed the first sostenuto system? David Ilvedson, RPT Pacifica, CA 94044 Original message From: "Delwin D Fandrich" To: "College and University Technicians" Received: 7/18/2008 11:26:15 AM Subject: Re: [CAUT] Forum format (was Re:Requirementsforcontributing/posting; RPT status I have never seen a sostenuto rod mounted on the action from any other manufacturer. There is probably good reason -- ddf Delwin D Fandrich Piano Design & Manufacturing Consultant 620 South Tower Avenue Centralia, Washington 98531 USA Phone 360.736-7563 <mailto:fandrich at pianobuilders.com> From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Michael Magness Sent: July 18, 2008 10:10 AM To: College and University Technicians Subject: Re: [CAUT] Forum format (was Re: Requirementsforcontributing/posting; RPT status On Fri, Jul 18, 2008 at 9:30 AM, Ron Nossaman <rnossaman at cox.net> wrote: . . . . The list membership sees a lot more different brands of piano than I do, so tell me, does any other manufacturer mount the brackets on the action? Have they ever? Good ideas that have been around a long time tend to be emulated in some form by others, as do perhaps less sterling ideas implemented in prestigious brands. Ron N -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20080718/e3411dc4/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC