Hi David, I've had great results with the Pitchlock Couplers. There is a bit of a learning curve but with a little practice, like almost everything we do, it will soon be simple. It took me one time of making a mess with the glue to be glad to have an different method! jeannie -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of David Ilvedson Sent: Thursday, January 17, 2008 6:21 PM To: caut at ptg.org Subject: Re: [CAUT] Roger Jolly's article I've been meaning to try Scott Jones' pitchlock thingys. Seems like a good way to change the mass without "messy glue"...;-] Actually, if they are a pain to put in, I'd likely use glue... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: Don <pianotuna at accesscomm.ca> To: "College and University Technicians" <caut at ptg.org> Received: 1/16/2008 4:00:00 PM Subject: Re: [CAUT] Roger Jolly's article >Hi Paul, >It doesn't have to be epoxy--anything that changes the mass and therefore >the resonate frequency will work. >At 08:23 AM 1/17/2008 -0600, you wrote: >> >>Hi List, >> >> I've done it a few times and it does help and wanted to share it with >>our chapter next meeting for the aftermeeting presentation. >> >>Thanks >> >>PaulNo >Regards, >Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. >Non calor sed umor est qui nobis incommodat >mailto:pianotuna at yahoo.com http://us.geocities.com/drpt1948/ >3004 Grant Rd. REGINA, SK, S4S 5G7 >306-539-0716 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC