The hole is on the rounded side of the pin, not at the bottom of the squared off "side". Paul "Greg Newell" <gnewell at ameritech.net> Sent by: caut-bounces at ptg.org 02/05/2008 09:00 PM Please respond to College and University Technicians <caut at ptg.org> To "'College and University Technicians'" <caut at ptg.org> cc Subject Re: [CAUT] Puzzler Ain't the hole a little high up on the pin? Greg Newell Greg's Piano Forté www.gregspianoforte.com 216-226-3791 (office) 216-470-8634 (mobile) -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jon Page Sent: Tuesday, February 05, 2008 9:17 PM To: caut at ptg.org Subject: [CAUT] Puzzler Aside from being askew, does it go all the way through? I've had a few pins with no holes and partial holes and askew... so what's so abnormal?? -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20080206/a174cc48/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC