Thanks David, Yes, that's what I found too. Also, they had 3/8 to ½ inch let off. Jim Busby BYU p.s. David, is there going to be an AZ Convention this year? ________________________________ From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of David Brown Sent: Sunday, October 14, 2007 1:54 PM To: caut at ptg.org Subject: [CAUT] Upright geometry problem (Nordiska) Hi Jim- We found that the blow had been increased and the dip increased so much in an attempt to give aftertouch it wasn't getting due to the strong damper, hammer and jack springs. You just couldn't play hard enough to overcome the spring strength and get the jack to clear. Just my 2 cents. David David C. Brown Arizona State University School of Music Piano Technician 1-480-965-6760 david.c.brown.2 at asu.edu -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20071016/af7e606a/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC