New Building SpecsKen, a woodworking tool store should be able to design a shop lay-out for you based on the tools list in the Guidelines. Just ask them to set up an efficient dust collection system for you. This will give you your square footage. Then add regulating and assembly space to this. (we have three reg benches on the go all the time, plus an assembly station, and it's never enough!) If you're rebuilding in-house, consider you might always have 3 or 4 instruments in at a time, in various states of completion, or dust collection. ;>) Now, if you have a plate out, a soundboard panel for fitting, and case parts from even one of these pianos, this can take up the space of 3 more instruments. And you also need room to move around. Having said all that, our shop here isn't much more than 600 sq. ft, but somedays I wish I'd worn my old hockey elbow and shin pads to work! best regards, Mark Cramer, RPT Brandon University -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org]On Behalf Of KEENA KEEL Sent: Monday, October 23, 2006 5:25 PM To: College and University Technicians Subject: Re: [CAUT] New Building Specs Hi Ken, I am familiar with Susaki. They worked on specs to assist in developing housing for the enterprise zone where I live. We are in the process of voting on whether or not to become a new town in the Commonwealth of Massachusetts. They are quite accomodating and will provide information on whatever is required. The key to working with them is to assure that they are given all of your necessary requirements and parameters. Keena Keel, RPT ----- Original Message ----- From: Ken Zahringer To: College and University Technicians Sent: Monday, October 23, 2006 3:34 PM Subject: [CAUT] New Building Specs I need some advice, guys. Much to my shock and surprise, the University has hired an architectural firm to begin the planning & design process for a new School of Music. I mean, our current building is only 55 years old, and it has fully half of the space we need! Anyway, the Director sent out a draft of the space needs for the new building on Friday. The draft recommends 600 sq ft, with an inventory of 175 or so pianos. I think Ill need more than that. Some questions for you: Im sure some of you have moved into a new building in the last 10 years or so. What kind of shop facility did you get, how involved were you, how did you justify your recommendations (if any)? How is it working? Anything you should have done differently, or any features you wouldnt trade for the world? Does anyone know of any authoritative source I could use, other than the Guidelines & Steinways ISP, particularly one that directly addresses shop size? The University has hired Susaki Architectural Associates from Boston. Anybody familiar with these guys, good, bad or indifferent? You can reply off-list if need be :-) Thanks for any and all comments, Ken Z. -- Ken Zahringer, RPT University of Missouri School of Music -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20061023/ae941528/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC