Hi David, I emailed Jurgen and he says he doesn't have them for the Hamburg D. Thanks though. Regards, Jim Busby -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of David Ilvedson Sent: Friday, October 20, 2006 2:27 PM To: caut at ptg.org Subject: Re: [CAUT] Friday vent You might consider Andre's hammers. Jurgen has them...I think for Hamburg Steinways David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Jim Busby" <jim_busby at byu.edu> To: "College and University Technicians" <caut at ptg.org> Received: 10/20/2006 12:53:40 PM Subject: Re: [CAUT] Friday vent >Hi Ric, >I need a set of Hamburg hammers and I'm told it would take months to get >them. Is that your experience? >Regards, >Jim Busby BYU >-----Original Message----- >From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of >RicB >Sent: Friday, October 20, 2006 1:06 PM >To: caut at ptg.org >Subject: [CAUT] Friday vent >Conrad mein Frenn. >You might mention to the guy that Hamburg Steinway hammers are a very >very attractive alternative to New York hammers. And that Steinway >Hamburg wouldnt think of using anything but Wurzen II felt. >Tho it may be difficult to order direct from your placement in life, we >all know there are plenty ways around that. You want Renner Europe >hammers, or even Hamburg origionals.... that is doable for sure. >Cheers >RicB
This PTG archive page provided courtesy of Moy Piano Service, LLC