I usually indicate whether or not the measurements were taken with the string at tension and that seems to work. Aaron At 11:11 AM 5/25/2006, you wrote: >Jon, > >So the string maker doesn't do the subtraction when he gets the measurements? > >David Ilvedson, RPT >Pacifica, California > > > >----- Original message ---------------------------------------- >From: "Jon Page" <jonpage at comcast.net> >To: caut at ptg.org >Received: 5/25/2006 5:27:04 AM >Subject: [CAUT] bass strings from Samick? > > > >To order a string which will match it's neighbors in wrap placement > >measure hitch pin to winding and subtract 1/8". Measure length of > >winding and subtract 1/4". > > >If it's for a missing single string, measure to a line (ruler > edge) connecting > >its neighbors. Give core and wrap measurements for them as well and the > >note designation in question, the string maker can take it from there. > >-- > > >Regards, > > >Jon Page ------------------------------------------ Aaron Bousel abousel at comcast.net (413) 253-3544 (voice) (413) 253-3846 (voice & fax) -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060525/360c1f0f/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC