[CAUT] front rail delemna

[Joe And Penny Goss]

?? If there are black lag screws or gold zinc with six sided head I would opt for the front. Pitty the poor tech looking for the screws under the key bed who is use to finding them elsewhere <g>  Black permanent marker on the head??
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Wimblees at aol.com 
  To: caut at ptg.org 
  Sent: Wednesday, March 08, 2006 9:19 AM
  Subject: [CAUT] front rail delemna


  Both mortises that hold the front rail of a S&S grand have been damages, and the slot is now too big for the screw. What are some ways to hold the rail on the piano? Two option I am considering is drilling a hole through the front of the rail and attaching the rail to the cheek block. The other option is to attach the rail with screws from the bottom, like the way a lot of other grands have. The piano is in a practice room, so cosmetics is not important. 

  Wim 


------------------------------------------------------------------------------


  _______________________________________________
  caut list info: https://www.moypiano.com/resources/#archives
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20060308/b250b0ed/attachment.html