>I like powdered Teflon in the bushings. A pipe cleaner works great. I do as well but insert it into a section of player tracker bar tubing as a handle. With only 1/2" protruding out the end of the handle, the pipe cleaner is 'stiffer'. I've worked out a quick method of application: Dip the end of the applicator into the powder and lightly tap off excess. With the key in the other hand, apply the powder to the balance rail bushing with your thumb in-line with the mortice slot (important alignment - you'll see). Flip the key over and apply powder to the front rail bushing, now your thumb will be perpendicular to the mortice slot (removing powder from the previously untouched edges of the applicator). All without having to reposition the hand holding the applicator. Then insert the applicator into the b/r hole, spin, repeat on next key. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060727/1a452f18/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC