[CAUT] Re: Fujan lever

Joseph Alkana josephspiano@comcast.net
Mon, 23 Jan 2006 20:56:28 -0800


I can attest to the solid feel of the Jahn hammer, having used one now for 
about 5 months. I had to go for the 15 degree angle of the adapter, as 
opposed to the 5 degree one sent with the unit originally. Two things I 
would wish for are:
1) a 10 degree adapter
2) a shorter tip to adapter length, so as to reduce the height of the pin 
contact point and the incident angle of the handle.
What would the Fujan hammer lever offer?
Joseph Alkana RPT


----- Original Message ----- 
From: "Bob Hull" <hullfam5@yahoo.com>
To: "College and University Technicians" <caut@ptg.org>
Sent: Monday, January 23, 2006 7:08 PM
Subject: Re: [CAUT] Re: Differencees Men/Women


> As you are considering various tuning levers and
> making comparisons, I would encourage you to look at
> the Jahn.  I just began using one about 3 weeks ago.
> It has a more solid feel than the extension hammer I
> was using. I can feel the movement of the tuning pin
> more readily and it seems like less force is reguired
> to turn the pin since some of the "play" was
> eliminated that was in the other lever.  The Jahn is
> heavier than what I was using but the weight isn't
> bothering me.  Also, the Jahn is shorter than some
> levers, which makes it more agile moving from pin to
> pin - unless you need to extend it for leverage on
> tight pins.
>
> I would like to try the Fujan but probably won't since
> I just spent the dough on this one.
>
> Bob Hull
>
>
>
> --- Jeff Stickney <jpstickney@montanadsl.net> wrote:
>
>> Jim,
>>
>> I would be interested in your reactions to the
>> information on the Fujan
>> website regarding stiffness of materials (comparing
>> steel, titanium and
>> aluminum tube).  I don't doubt that some or much of
>> what we feel is
>> flexure in the pin, as well as whatever "slop" there
>> is in the fit of
>> the tip to the pin.  Fujan's contention would be
>> that, regardless of
>> what the pin is doing, an aluminum tube would be
>> much stiffer than a
>> steel shank, and therefore you have more control and
>> a better feel.  I
>> believe I am representing the concepts well, but
>> please check out the
>> web site and let me know what you think.
>> http://www.fujanproducts.com/
>>
>> Jeff Stickney
>>
>> James Ellis wrote:
>> > Now, as for the flexure of tuning hammers (that
>> someone mentioned along
>> > with the discussion about men, women, and strength
>> of arms).  Most of the
>> > flexure that you feel when you use a tuning hammer
>> with a long handle to
>> > turn a tight pin is NOT coming from the tuning
>> hammer; it's coming from the
>> > tuning pin itself.  The long handle just makes you
>> more aware of it.
>> >
>> > Sincerely, Jim Ellis
>> >
>> > _______________________________________________
>> > caut list info:
>> https://www.moypiano.com/resources/#archives
>> >
>> >
>> _______________________________________________
>> caut list info:
>> https://www.moypiano.com/resources/#archives
>>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> caut list info: https://www.moypiano.com/resources/#archives
> 



This PTG archive page provided courtesy of Moy Piano Service, LLC