On Aug 2, 2006, at 7:37 PM, Fred Sturm wrote: >> After polishing the pins with Flitz, he recommends >> cleaning the pin with naptha before applying McLube. This removes >> quite a bit of residue from the pin, which he says can become >> somewhat gummy if not removed. I'm not sure if the stuff that's >> removed is the "no residue" rust preventer or not, but there's sure a >> lot of it, whatever it is. Could it possibly be old McLube? (That's why I don't use the stuff) Jeff Jeff Tanner, RPT University of South Carolina -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060803/97ccbfa0/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC