It didn't matter what I did, it didn't help the sound. That SD6 is hard to keep sounding decent. I wasn't happy with it. I certainly needed the experience. I felt I've been really lucky the way my tuning for concerts has held up. It only deepens my resolve for improvement. This job is tough at this level. Keith ----- Original Message ----- From: "Cy Shuster" <cy at shusterpiano.com> To: "College and University Technicians" <caut at ptg.org> Sent: Sunday, April 23, 2006 6:41 AM Subject: Re: [CAUT] Weight of solder > Stanwood has a diagram of this: > http://www.stanwoodpiano.com/clipinfo.jpg > > >From the weighing-off I've done, I'd say solid-core solder is about 1.6g per > inch -- *very* rough estimate. > > --Cy-- > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC