This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Subject: [CAUT] Titebond Molding & Trim Wood Glue Someone mentioned this glue a couple of weeks ago saying it was good for gluing on upright hammers. It's not the easiest glue to find but there is a store in Dallas that carries it. I got some yesterday and glued some sample grand hammers on shanks. I put some on with a fairly tight fit, and another with a pretty loose fit on the shank. I just removed a couple of the hammer heads, and have just re-glued a looser fitting hammer. The glue is somewhat more gel like than some. It flows easily but doesn't run or drip. It also sets up hard but not brittle. So far I like what I see. Has anyone used this on grand hammers? dave __________________________ David M. Porritt, RPT We've been using this glue since it became available-10 + years. It works well for grand and vertical hammers. It has just become available from Pianotek. Paul C ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/e2/09/9f/c4/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC