[CAUT] Lacquering Steinway Hammers

[David Love]

I sent Eric an email inquiry about this and will let you know if and
when I hear back.  

David Love
davidlovepianos@comcast.net 

-----Original Message-----
From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of
David Love
Sent: Wednesday, November 10, 2004 6:53 PM
To: 'College and University Technicians'
Subject: RE: [CAUT] Lacquering Steinway Hammers

I am wondering if in the article published by Eric Schandall about the
type of lacquer used whether he meant to say 12% by "volume" rather than
by "weight".  Researching the spec sheets on various lacquer products, I
can find no water white nitro lacquers which are lower than 21% solids
by weight.  There are, however several which approach the 12% figure by
volume.  

David Love
davidlovepianos@comcast.net 




_______________________________________________
caut list info: https://www.moypiano.com/resources/#archives