Strings riding up (was Tuning stability)

Wimblees@aol.com Wimblees@aol.com
Thu, 1 Apr 2004 00:31:20 EST


---------------------- multipart/alternative attachment
In a message dated 3/31/2004 10:04:57 PM Central Standard Time, 
Tunapianer@aol.com writes:
Is the termination seriously compromised or disturbed when the strings are 
allowed to ride up on the bridge pins?  Aside from the obvious weakened tone 
and 
potential false beats, are there long-term effects?  What if you never tap 
them down?  How often to tap?  Sure messes up stability...

Greg Soule
Pensacola, FL
Tapping strings should be done on an as needed basis. If you don't tap the 
strings, it will, as you point out, create false beats, and it weakens the tone. 
So why would you not tap the strings? As long as you use a brass rod of some 
sort on the strings, I don't think you're going to compromise the strings. Not 
only do I use a brass rod, I use a soft face hammer because I think It 
reduces the impact of the rod on the string. However, I was taught to always tap the 
strings on the bridge, not in front of the bridge. This reduces the notching 
of the bridge. 

Wim 
Willem Blees, RPT
Piano Technician
School of Music
University of Alabama

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/83/3c/1f/7b/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC