It is apparently very hard to move a CA bridge pin. may be with heat. Tuning pins have a very strong lever applied, not at all the same problem. have a nic week Isaac OLEG Entretien et reparation de pianos. PianoTech 17 rue de Choisy 94400 VITRY sur SEINE FRANCE tel : 033 01 47 18 06 98 fax : 033 01 47 18 06 90 cell: 06 60 42 58 77 > -----Message d'origine----- > De : caut-bounces@ptg.org [mailto:caut-bounces@ptg.org]De > la part de Ron > Nossaman > Envoye : lundi 20 octobre 2003 06:39 > A : jpstickney@montanadsl.net; College and University Technicians > Objet : RE: CA ing bridge pins > > > > >List, > > Sorry to jump in a little late on this, but I > have one question > > regarding > >use of CA on bridge pins. It sounds like a great solution > for loose > >pins/false beats, the same as in a pin block (not the > false beats part), but > >as Dan Levitan brought up in the August issue of the PTJ, > is this a problem > >for the rebuilder when it comes time to pull the pins? > Does the CA lose > >it's grip over time, and the pins come out easily, or is > this a potential > >problem in the long term? > > > >Thanks, > >Jeff Stickney, RPT > > Why would it be? Does it preclude pulling tuning pins when > the time comes? > How can CA be a miracle cure for loose tuning pins, which > must remain > movable, yet permanently bond bridge pins in the cap? > > Ron N >
This PTG archive page provided courtesy of Moy Piano Service, LLC