As promised The little hook is very convenient, with the good cauls (thanks Bill !)it takes 1:30 h to glue the set (balance) Cut the felt before gluing the other side, not while gluing . That way you can have a neat cut from the inside toward the external of the key. I sell the key bushing inserting tool made with genuine Roslau wire - a German tool that will last for years. (actually out of production because of so many demands). best Regards. Isaac OLEG [The photos are at:] https://www.moypiano.com/ptg/files/attachments/1e/e9/8b/2d/EPSN0058.JPG https://www.moypiano.com/ptg/files/attachments/1c/18/4d/9c/EPSN0054.JPG https://www.moypiano.com/ptg/files/attachments/9f/45/29/72/EPSN0055.JPG [or:] http://tinyurl.com/cc4q http://tinyurl.com/cc4t http://tinyurl.com/cc51
This PTG archive page provided courtesy of Moy Piano Service, LLC