Well Avery, That was just what I was guessing. Travel and align your shanks & heads and the shift will be fine. Zoreil > I don't think the stop block needs to be cut down that much > as I believe > even 1/16th of an inch will probably make the UC work fine > but I'm not > sure the hammers can be moved even that much on that kind of rail. > > I'll call and talk to the dealer's tech in a little bit and > see what he > says. > > Avery > University of Houston > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC