bobble heads rule(r)

Richard Brekne Richard.Brekne@grieg.uib.no
Wed, 16 Oct 2002 20:12:33 +0200


Newton Hunt wrote:

> Hi Wim,
>
> The "standard" distance, center pin to hammer molding center line, is
> 5.125".
>

I thought it was 133 mm. This gives 130.1^^^^


>
> Check for worn leather, too smooth leather, chucking keys and bouncing
> dampers.
>
> Lots of luck.
>
>                 Newton
>
> _______________________________________________
> caut list info: https://www.moypiano.com/resources/#archives




--
Richard Brekne
RPT, N.P.T.F.
UiB, Bergen, Norway
mailto:rbrekne@broadpark.no
http://home.broadpark.no/~rbrekne/ricmain.html



This PTG archive page provided courtesy of Moy Piano Service, LLC