Hi Jon, That comes later. If I'm not mistaken, you're the one who got me started weighing the "raw" parts before I installed them. :-) Avery >At 03:43 PM 10/8/2002 -0500, you wrote: >>I just got through weighing a set of new shanks/flanges >>for a S & S 'M'. They ranged from 8.2 grams to a low of >>6.8 grams! No wonder we have "weight" problems with new >>parts! >> >>Avery > >It's not the actual weight of the s/f but he levered weight which the string. > >With center pin on a pivot off the scale (flange is straight up -no >weight effect) >place the hammer end on a riser on the scale where the hammer is glued. > >You will find the weight then to be in the range of 1.5g to 2 g > > >Regards, > >Jon > > >_______________________________________________ >caut list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC