My stack came with all letoff button ready. holes where finely drilled too (new screws are necessary). Isaac OLEG > And you will have to add the let-off screws and buttons. > (If for some reason the new frame really won't fit, you > can probably return it to Steinway.) > If you replace the rails yourself, count on a half > day's work to build an indexing frame to position the rails, 3-4 hours to do > the job if you have a frame already built. (Use old shanks and flanges gobbed > together with thick CA glue to index the rails. If you want to go this > way, I'll give the details.) > If you send it out, you will need to build a crate, and > the cost of > having two new rails bored and soldered in is more than the > cost of the new > stack. > I found the genuine Steinway rails were as accurately > drilled as the finest duplicate of a genuine Steinway rail, so lateral > spacing was not a > great problem, just genuine Steinway as usual. > Ed Sutton > > > ---------- > >From: John Minor <jminor@uiuc.edu> > >To: <caut@ptg.org> > >Subject: Replacing Steinway Action Frame? > >Date: Thu, Nov 7, 2002, 2:05 PM > > > > > I'm considering ordering a new action frame from Steinway > instead of > > replacing the 2 split rails. Anyone ever replace the > entire frame? How > > much work is involved? > > > > John Minor > > University of Illinois > > > > > > > > _______________________________________________ > > caut list info: https://www.moypiano.com/resources/#archives > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC