ROGER JOLLYS' IDEA WORKED

[Michael Jorgensen]

Thanks Lance,
      I'll try it.  Do you keep adding drops as long as the glue wicks down
in or do you use just one drop for each pin?  I assume also that you let it
dry naturally without catalyst, which could take some time to solidify and
make an improvement?

-Mike

Lance Lafargue wrote:

> It worked for me, too, Mike.  You may try water thin CA on the pins later,
> w/out getting it on the string/pin termination.  Apply w/needle-nose
> applicator from the back side, away from the string.
> Lance Lafargue, RPT
> Mandeville, LA
> New Orleans Chapter, PTG
> lancelafargue@bellsouth.net
> 985.72P.IANO
>