removing a plate by myself

[Wimblees@aol.com]

---------------------- multipart/alternative attachment
In a message dated 7/18/02 11:27:34 AM Central Daylight Time, fssturm@unm.edu 
writes:


> Wim,
>     You don't need to hang the hoist from the existing ceiling. What I do
> is brace a beam against the ceiling. I use a 4 x 6 beam, held up tight
> against the ceiling with two 2 x 6's, each with an appropriate notch cut
> to hold the 4 x 6. As long as it is fit firmly (a wedge or two helps),
> it works just great.
>     

In my previous shop. I had to set up a system similar to what you've done. I 
used a steel beam to hang a trolley on it, so that I could move the plate 
away from the piano, instead of the other way around. But, unfortunately, my 
shop here is not set up so I can do that. 

Wim 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/ac/11/91/25/attachment.htm

---------------------- multipart/alternative attachment--