On 2/8/02 5:00 AM, "Newton Hunt" <nhunt@optonline.net> wrote: > The > easier solution is to glue on some nice wood strips to the bottom of the > hammer with CA glue such that the backcheck is moved away from the > hammer. This strip may be as small as 3/8" grain oriented 90 degrees > (better checking) and extending down as far as needful. Trim the sides > to match the hammer tapering and reshape at a proper 2" radius. Has anyone drawn this modification? You know, a picture is worth 1,000 words and all that... Kent Swafford
This PTG archive page provided courtesy of Moy Piano Service, LLC