Plywood seems like the way to go to me. Especially with a humidity system in the box. It will be more durable than a normal piece of lumber. There was a post recently about how to build a free standing humidity system for pianos that are stored in an enclosure. Good luck -Chris Dant ----- Original Message ----- From: "Greg Newell" <gnewell@ameritech.net> To: "Piano Technicians, Master" <MPT@talklist.com>; "Pianotech, forum" <pianotech@ptg.org>; "University Technicians, College and" <caut@ptg.org> Sent: Wednesday, April 24, 2002 3:36 PM Subject: Piano Apartment > Greetings and psychedelic hallucinations, (just kidding) > I have a local community college who is doing an intelligent thing. > They are insisting that the Theater technical guy build an apartment for > the piano off stage for it's storage when not in use. This must be very > strong as things will surely be piled on top of it and or built above it > and it was asked of me what the ideal wood used should be. I'm guessing > he's willing to do whatever will get the department chair off his back > but he wrote back with these ideas; Pine, Spruce, Redwood, Cedar, Oak, > Teak, Mahogany, Ebony? or, particle board, T-111, plywood, plaster > board, ... ? Me thinks he was trying to be funny with a few of these but > it is a serious question. They are also asking about a humidity control > system. Should that be installed permanently in the apartment or on the > piano or both? and why. Thanks for your thoughts. > > -- > Greg Newell > mailto:gnewell@ameritech.net > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC