This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Wim, It seems you get the discussion going on most any subject. I have had the very experience that you are mentioning. I have not had any difficulty in pulling them out once the glue is loose. I have tried many methods through the years. A local old-timer whom has since passed away used to fold a thick cloth in to a strip that would cover the bushings, wet it, wring it out, lay it over the bushings or other felt to be removed, then set a hot iron on top. I can already hear the questions. Won’t this cause the button or other glued things to come loose? Yes if the steam is left on too long. This same method is good for removing keytops as well. Lonnie Young -----Original Message----- From: owner-caut@ptg.org [mailto:owner-caut@ptg.org]On Behalf Of Wimblees@aol.com Sent: Wednesday, April 10, 2002 11:51 AM To: Pianotech@ptg.org; caut@ptg.org Subject: Kawai bushings I am trying to rebush the balance rail of a 30 year old Kawai Studio. The bushing are folded under the button. What is the trick to get the felt out from under the button? Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/19/5b/f5/a1/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC