Slick Key Bushings.

[John Baird]

----- Original Message -----
From: Fred Sturm <fssturm@unm.edu>
To: <caut@ptg.org>
Sent: Monday, April 08, 2002 1:50 PM
Subject: Re: Slick Key Bushings.


> My solution was to remove the keyslip and spray prolube up at the front
> pins, then wipe the residue from the keys. Worked quite well, but

I have found that after using Prolube, if I worked the key up and down
pressing it sideways against the pin, I could get a squeak and some
resistance--not so with TFL50.

John Baird
Millikin University
Decatur, Illinois