---------------------- multipart/alternative attachment At 02:24 PM 4/1/2002 -0500, you wrote: >I am not using Hamburg damper felts, but I am having a problem with some >NY felts I just put on a B. There are three bichords that are giving me >fits. I have tried everything, but it still is not cutting off on a sharp >blow. I finally super glued a small nut to the flange, which is helping >some. This is leaving me to believe that perhaps the spring has lost some >of it's strength. I removed the lever, and tried bending the spring down >as much as possible. Short of removing the entire tray, and rebending each >spring, does anyone have a better idea. > >Wim >U of Alabama With the tray removed you can place each underlever on a digital scale and adjust the tension to produce the weight graduation listed in the Renner USA Underlever Kit Brochure. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@attbi.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/46/29/b1/17/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC