.131" front-rail pins

[Newton Hunt]

Call or fax Glorie Lefrak and ask about those pins.  If it is in a
"modern" S&S they likely have replacement pins.

If not get in touch with Renner or Kluge or the supply houses.

		Newton

Mark Cramer wrote:
> 
> I have an S&S keyframe circa 1988 with nasty nicks on the front rail pins,
> the pin size is .131" but Steinway only shows .145" front rail pins.  Where
> can I source new .131" pins.
> 
> BTW, thanks for the ongoing help in replacing the harpsichord string. I've
> saved evryone's post, and one day will actually have to go and replace that
> darned string!  :>)
> 
> Please help me recall that saying, " even the most elaborate plans must
> eventually regress into actual work?"
> 
> Mark Cramer,
> Brandon University