Alas, this particular Baldwin upright seems to have been shipped w/o the knuckles and rep. levers in place!? :>) Mark -----Original Message----- From: owner-caut@ptg.org [mailto:owner-caut@ptg.org]On Behalf Of jolly roger Sent: Friday, February 16, 2001 10:13 AM To: caut@ptg.org Subject: RE: psycho-acousti-what? At 10:00 AM 2/16/01 -0600, you wrote: >Thanks Jim, >I've levelled strings in some verticals with agraffes (Petrof, etc.) in the >tenor. Any suggestions on how to block the hammer and pluck strings in the >treble? > >Mark Cramer, >Brandon University Hi Mark, Place a double thickness of cloth between the knuckles and the rep levers, the hammers will block nicely. use a pencil to mark all the high spots. With practice you can tell how much to take off by the length of the line you draw. I have found that there is a lot less pushing and pulling the action. Gina and I covered this in our regulation series. Regards roger
This PTG archive page provided courtesy of Moy Piano Service, LLC