Mark: If it is a Steinway "D" check the waste lengths behind the treble bridge. There are some long ones that the factory often doesn't braid, but they should. dave *********** REPLY SEPARATOR *********** On 2/28/00 at 5:56 PM Mark Cramer wrote: >We have a busy week of recording. This AM, shortly after tuning, the >pianist pointed out A#5 was "ringing-on." There was no time to do a full >diagnosis, so I muted the speaking length to confirm it wasn't the A# >damper, then went thru all other notes from A0 on up to locate the source,.. >no luck! > >Tomorrow AM, I will have to go in and find/fix this. Anyone wish to >contribute suggestions from experience? Would be nice to have some helpful >replys by morning. > >Many thanks! > >Mark Cramer >Brandon University David M. Porritt dporritt@swbell.net Meadows School of the Arts Southern Methodist University Dallas, TX 75275
This PTG archive page provided courtesy of Moy Piano Service, LLC