Ron, Could we have a little more information, please? What parts? Original? I certainly like Newton's suggestions, but would like a little more to go on. Thanks. Horace At 09:03 AM 9/15/1998 -0400, you wrote: >Here's one to ponder. > >We have a 1964 Steinway B, in a piano studio, whose touchweight is >incredibly high. Downweight ranges from +68g to 55g. Return weight is >high (nothing below 30), and I've confirmed that the centers are free >(some centerpins working their way out) and keybushings are loose (not >knocking against each other, but wobbly all the same). The hammers are >typical S&S issue, shanks and flanges are also NY parts (as opposed to >Renner). I suspect a leverage problem. > >Here's the thing, though. Should I advise the resident of that studio that >playing that instrument too much (for extended periods without stopping to >rest) might be doing damage to the pianist? > >Ron Torrella, RPT >Piano Technician >University of Michigan >School of Music > Horace Greeley, CNA, MCP, RPT Systems Analyst/Engineer Controller's Office Stanford University email: hgreeley@leland.stanford.edu voice mail: 650.725.9062 fax: 650.725.8014
This PTG archive page provided courtesy of Moy Piano Service, LLC