> From: Tcoates@aol.com > Date: Wed, 9 Jul 1997 08:39:33 -0400 (EDT) > To: caut@ptg.org > Subject: Re: key bushings > Reply-to: caut@ptg.org Hi Tom, I remember Bill Spurlock writing about using two 4" files epoxied together to size the mortices. I seem to have a hard time finding a 4" file. You mentioned "correct size files glued together". Where do you get the differnent files? Thanks in advance... David ilvedson, RPT Pacifica, CA > Yes. It smoothes out the felt fibers, preventing future sticking. Also > makes sure all mortises are equal in size. I've found the mortise is the > most important part in the process. Make sure mortises are all the same > before felting by using correct size files glued together. They look like a > file sandwich. I use the Bush Master with the brass cauls from Pianotek. My > 12 year old son is doing a set fot me right now. > > I get almost no wobble and the key moves freely. > > Tim Coates > University of South Dakota > >
This PTG archive page provided courtesy of Moy Piano Service, LLC